Clamp the wire in the hole and pull the stripper towards the other end of the wire. For this, you will need a wire stripper that is approximately one to two sizes smaller than your wire. Then, you need to remove approximately one inch of insulation from each wire you will be splicing.If the wire is attached to the wall and cannot be unplugged, always turn off the circuit. First, unplug the device that contains the wires you are going to be splicing.To complete this method, the steps you need to follow include: Before you splice them together, you may decide to strip the insulation. The first option is to strip the wires and then splice them. What are the pros and cons of each method? There are several steps to follow. You might use a wire cap or nut if you are working with smaller wires however, you may decide to use a butt splice if you are working with larger wires. In other cases, you may try to solder them together. In some cases, you may simply use a few wire caps.

There are many ways you can splice wires together. If you are splicing wires together, you combine two separate lengths of wire so that they can carry a current for you. You cannot join wires that are not the same gauge, as you are going to run into some serious electrical problems. That way, they can quickly and efficiently transfer electricity to each other. If you need help figuring out which junction boxes best for you, reach out to your local hardware store.įinally, before you start, you also need to make sure the wires you are putting together have the same gauge and number of wires.

Then, you should make sure you have the appropriate junction box to make sure your splice is safe. These come in various shapes and sizes, so you have to think about completing the project. In addition, if you decide to splice some wires together, you have to make sure you have junction boxes available.

Will there be a splice 2